• T10C Transmitter - 3 x 3152 Digital Servos - 1 x R6014FS/2-4G Receiver - Mains Charger

10C Overview:

• Big, 160 x 72 LCD with backlighting, adjustable contrast & auto-off
• Dial'n Key^TM programming with joystick navigation
• 15-model memory (expandable with optional CamPACs)
• Ten character user name
• Ten character model name
• Basic and Advanced menus
• Enhanced airplane, heli and glider software
• "Logic Switches" activate a new condition if specified switch positions occur
• Up/down, on/off timer (activated by stick or switch)
• Tracks service hours for radio and models
• Mode 1-4 selectable (Modes 3 and 4 programmable)
• Assignable functions/switches
• Auxiliary channel screen for 1-step function/switch assignment and eliminating unused auxiliary functions
• 2 proportional slider switches
• Digital trims on all 4 main channels
• Trim memory and sub-trims
• Adjustable trim steps (1-40)
• Fail-safe, servo reversing and EPA
• "Full Functionality" trainer system (cord required)
• Flap switch (3-position)
• Retract switch
• Variable-rate knobs (3)
• Adjustable Throttle Cut/Idle Down
• Sticks with length and tension adjustments
• 1024 resolution
• Servo cycle with bar graph displays
• Constant trim, voltage, name and timer display

10C specifics:

• Advanced Airplane Menu (16) with eight programmable mixes (four linear/four with 5-point curves)
• Nine factory-defined mixes: Elevator-Flap;, Ailevator; Throttle-Needle; Aileron Differential; Flaperon; V-Tail; Elevon; Snap Roll; and Air Brake with elevator delay
• Two independent gyro settings
• Seven-point throttle curve
• Flap trim
• Two-rate gyro system
• Dual/triple rates (3 channels) Aileron, Elevator, Throttle, Rudder
• Exponential (3 channels) Aileron, Elevator, Throttle, Rudder
• Idle down

Advanced Heli Menu:

• Accepts separate gyro sensitivity, governor speed and servo travel rates for up to 4 conditions and automatically changes all three with a change in condition.
• Six programmable mixes (four linear/ two 5-point curves)
• Eight factory-defined mixes: Hover-Throttle; Hover-Pitch; Throttle-Needle; Governor: Offset: Revo (5 point); Delay; and Throttle (aileron/elevator/rudder)
• Gyro menu
• Eight swash plate types
• Swash plate AFR
• Four 7-point throttle and pitch curves with delay (N, 1, 2 and 3: +/-100%)
• High/Low pitch setting
• Three adjustable idle-up conditions and normal condition
• Throttle Hold and Idle-up with delay

Advanced Sailplane Menu:

• Eight programmable mixes (four linear/ four 5-point curves)
• Twelve factory-defined mixes: Butterfly-Elevator (2); Elevator-Flap (0-100%); Camber (with aileron/elevator/rudder adjustment); Aileron-Flap (0-120%); Aileron-Rudder/ Flaperon; V-tail: Flap Trim; Butterfly with spoiler adjustment and 4-point Offset (with camber adjustment for basic/launch/thermal/speed)
• Adjustable spoiler
• Adjustable throttle cut
• Single/Dual Flap servos
• Start, speed, distance and landing conditions
• Adjustable motor cut